• Condition: Rated A with no dents / no missing parts (open box)
  • Certified Refurbished by Zalman USA
  • Optimized Cooling Performance: Hairline pattern front and side mesh design along with 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel.
  • Powder Coated Steel: The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant.
  • Versatile Layout: T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards.
  • Bays and Ports: (2) 2.5” and (2) 3.5/2.5" drives, external bay for a 5.25" drive, I/O port with 1 x USB 3.0, 2 x USB 2.0, 1 x Audio In, 1x Audio Out
  • Caution: this case will not fit ATX motherboards with side-facing SATA ports.


Model T6
Case Form Factor ATX Mid Tower
Dimensions 377(D) x 200(W) x 430(H)mm
Weight 2.82 kg
Motherboard Support ATX, mATX, Mini-ITX
MAX VGA Length 280mm
MAX CPU Cooler Height
165mm
MAX PSU Length
160mm
PCI Expansion Slots
7
Drive Bays
2 x 3.5" HDD or 2.5" SSD, 2 x 2.5" SSD, 1 x 5.25" ODD
Fan Support
Front:2 x 120mm,  Rear:1 x 120mm, Side:1 x 120mm
Fan(s) Included
Rear:1 x 120mm
I/O Ports
1 x Headphone, 1 x Mic, 2 x USB 2.0, 1 x USB 3.0, Power, Reset


T6 ATX MID TOWER COMPUTER CASE

ZALMAN T6
ATX Mid Tower Computer Case
The front mesh design provides optimal air circulation of the case and the hairline pattern brings out the stylish finish.

- Acrylic Side Panel
- ATX Mid Tower
- Pre-Installed 120mm Rear Fan
- User-Friendly Case I/O Port
- ATX, mATX, Mini-ITX Motherboard Support

Customer Reviews

Based on 2 reviews
0%
(0)
50%
(1)
0%
(0)
0%
(0)
50%
(1)
K
Kenneth Anderson
T6 Case -Not so Good

I purchased this case directly from the Zalman website as refurbished. Looks good but truly cheap in every way from super thin and easy to bend sheet metal to poor routing areas for cables if you install anything larger than an ATX Micro motherboard. The power supply installs in the top of the case however it dies not sit evenly in it's supports as the front of the power supply sags. Nice finish though, except for the huge engraved "Made in China" on the back. It will work as I built a machine out of old parts for a Linux machine, however I would not buy this for an even a semi-serious build. I paid $30 for it, which is cheap, but I actually don't think it is worth that amount.

R
Richard Thomas
Looked brand new for a refurbished product

Appearances of the case would never have revealed that this was a refurbished product. Excellent condition. Case design itself is somewhat onerous in the internal layout for mounting drives. Only one location to mount a full-size 3.5" HDD and two for mounting 2.5" SSD/HDDs.Internal cooling is limited to 2 120mm case fans (one in the rear of the case and one on the side cover).A 5.25" optical drive is almost impossible to mount with the front cover off the case. You need the cover in place to mount the drive.Overall, the case is well-built. It's a bit cramped between the optical drive and the power supply cables, but otherwise workable. The front panel controls would have been better located to the front to allow for additional space on the top for another cooling fan. Overall, this case is workable but has some shortcomings that keep it from a five star rating in my opinion. I would use this again in the futureif needed because the price point for a refurbished case in this condition is excellent.

Recommendations

Recently Viewed